This tutorial is about the How to Fix ‘iPhone 13 Pro Max Not Charging Properly’ Issue. We will try our best so that you understand this guide. I hope you like this blog How to Fix ‘iPhone 13 Pro Max Not Charging Properly’ Issue. If your answer is yes then please do share after reading this.
Table of contents
Check How to Fix ‘iPhone 13 Pro Max Not Charging Properly’ Issue
If your iPhone 13 Pro Max isn’t charging properly, don’t immediately assume that your phone’s charger or battery is bad. Based on personal experience, the problem and solution may be much simpler than you think. If your iPhone 13 Pro Max isn’t charging properly or at all, check out these nifty ways to fix an iPhone 13 Pro Max that won’t charge. The problem comes in varying degrees. Either your iPhone 13 Pro Max doesn’t charge at all when plugged in, or it charges very slowly (sometimes barely faster than it discharges). It’s a very common complaint, so here are some solutions. First turn off your iPhone.
Stay away from the power button while cleaning to avoid accidentally turning it back on. Security First! Use the flashlight to carefully inspect the Lightning port for signs of dirt. You’ll likely see debris on the contacts at the end, but also in the grooves that run along each side of the connector. Grab your toothpick, SIM eject tool, or other slim object. Plug it into the Lightning connector and scrape off as much dirt as you can. It’s best to scrape the connector, clean the stick or SIM eject tool, and then scrape again.
Clean the charging port
We’ve seen iPhones with charging ports clogged with chocolate after they were tossed into a bag along with a packet of candy. If your iPhone 13 Pro Max charging port is dirty, you can clean it yourself. You don’t need special cleaning kits, nor do you need compressed air. Even though many online tutorials recommend it. This is how you clean your iPhone charging port:
- First, turn off your iPhone. While cleaning, stay away from the power button so you don’t accidentally turn it back on. Security First!
- Carefully inspect the Lightning port for signs of dirt with the flashlight. You’ll probably see buildup on the contacts at the end, but also in the grooves that run along each side of the port.
- Grab your toothpick, SIM eject tool, or other slim object. Insert it into the Lightning port and scrape off as much dirt as you can. It is best to scrape the port, clean the stick or SIM eject tool, and then scrape again.
- It may take a while to loosen dried dirt. Keep checking with the flashlight until you can see the contacts at the end and the port looks significantly cleaner.
- Be careful not to apply too much pressure, even if you are using a toothpick. You don’t want the toothpick to break and cause a bigger problem. You also don’t want to damage the contacts by applying too much pressure with a SIM ejector tool.
- The most fragile part of a charger is the cable, not the adapter that plugs into the outlet. Apple users are particularly vulnerable here because Apple’s proprietary (and expensive) Lightning cables appear to have a life expectancy of around 15 minutes.
- But all cables have a tough life, and the endless flexing and winding can take its toll. Replacing a random lightning cable with the one that came with your iPhone is another shortcut to an unpleasant charging experience.
- The easiest way to diagnose a faulty cable is to try a different one and see if it works properly with your device. If so, you know the original cable was at fault. If not, that’s another potential villain we’ve ruled out.
Diagnose a dodgy adapter
- If the lightning cable doesn’t seem to be the problem, check the wall plug adapter. We have encountered issues on several chargers where the USB port loosens up a bit after endlessly plugging and unplugging the cable.
- Also, check to see if the same charger/cable combination works on a different iPhone because this will help you eliminate the possibility that it’s your iPhone that’s the culprit, rather than the cable or charger. You should also make sure that there is no problem with the wall socket.
- It is also important to check if the charger and cable combination is compatible with the iPhone 13 Pro Max, which helps rule out the phone as the cause of the problem. In the case of the charger, some models offer combinations of voltage and amperage for specific models, which can cause the charger to not charge the iPhone 13 Pro Max battery, and even if it does, it does so at a very slow rate.
Upload from the correct source
- Charging from a wall outlet will always be faster than charging through a PC or laptop because USB ports on computers deliver less power. A wall outlet can deliver twice the power of a USB port, and fast chargers can deliver up to five times as much power. All of this results in much faster loading speeds. So if your iPhone 13 Pro Max is charging slowly and is connected to a laptop: therein lies your problem.
- If your wall charger doesn’t seem to be delivering the goods, check that it’s appropriate for your device. A charger from another phone may not deliver the correct amount of power; for example, a charger for a Bluetooth headset will not generate as much power as one designed specifically for smartphones.
Turn it off
- Using battery-hungry apps/features while charging your iPhone 13 Pro Max will affect how quickly you gain battery life. If you’re charging while playing Call of Duty: Mobile at 100 percent brightness, the iPhone 13 Pro Max will naturally take longer to charge than with the screen, Wi-Fi, and 4G turned off.
- Switch the device to airplane mode or turn it off completely when charging if you want to see the fastest power injection. Think of it like making your device take a nap.
Final words: How to Fix ‘iPhone 13 Pro Max Not Charging Properly’ Issue
I hope you understand this article How to Fix ‘iPhone 13 Pro Max Not Charging Properly’ Issue, if your answer is no then you can ask anything via contact forum section related to this article. And if your answer is yes then please share this article with your family and friends.