Error 0x80780113, Not enough space to create the volume shadow copy | #itsecurity | #infosec


Here is a full guide on how you can fix the error 0x80780113 when the backup has failed on Windows 11/10. Windows offers a built-in Backup and Restore tool which is primarily used for creating a full system image backup so that you can restore the system to its original status if Windows gets corrupted. However, some users have experienced an error message “Not enough space to create the volume shadow copy” along with error code 0x80780113 while creating a Windows backup image. This error prevents you from successfully creating the backup image.

While the error message indicates low space for creating the backup image, there can be several other reasons for this error. It can be caused due to bad sectors on your drive, too many junk files, faulty disk drivers, etc. Now, if you are facing the same error in any scenario, you can resolve it using the methods we have listed here. Let’s check out!

Error 0x80780113, Not enough space to create the volume shadow copy, The backup failed

Here are the methods you can try to fix Windows Backup Image Error 0x80780113 on Windows 11/10:

  1. Create a new System Volume.
  2. Extend System Reserved Partition or Recovery Partition.
  3. Run Disk Cleanup Tool
  4. Run the Chkdsk command.
  5. Clear the current USN Journal.
  6. Ensure that System Protection is enabled.
  7. Update Disk Drivers.

1] Create a new System Volume

You can try creating a new system volume and then see if you are able to take a system image backup. To make a system volume on a primary partition of an MBR disk, you can use the following steps:

  1. First of all, open the Command Prompt with administrator privilege.
  2. Now, enter the following command in CMD:
    bcdboot.exe /s C:Windows /s F:

    In the above command, C: is the current system drive, while F: is the new partition of an MBR disk. You can change the drive letter as you want.

  3. When the above command is executed, you have to access the DISKPART tool in CMD. For that, you can type the below command and press Enter:
    diskpart
  4. Now, you have to activate the newly created partition as the main system reserved partition by using the below command:
    select volume F
    active
  5. Finally, press Enter and then reboot your system.

On the next startup, try taking system image backup and see if the error is now fixed.

2] Extend System Reserved Partition or Recovery Partition

As the issue is most likely caused due to low space to create shadow copy, you can try extending the system reserved partition or recovery partition. You can extend the system partition using the Disk Management tool. Or, you can also use a free third-party partition manager to easily extend the system or recovery partition. See if this fixes the error for you. If not, move to the next potential method to resolve the error.

See: Fix The backup failed, 0x80780119 error on Windows 10.

3] Run Disk Cleanup Tool

If there are too many junk files and unnecessary data on your drive, it can cause storage issues and you might end up running into error 0x80780113. So, try clearing up the junk files and then check if the error is fixed. To do that, you can run the built-in utility in Windows called Disk Cleanup. Just launch it from the Start menu, select the drive to clean up, check all the items in Files to delete, press OK, and confirm the deletion.

Alternatively, you can also use Storage Sense to clear up disk space.

When the jun files are deleted, you should be able to create a system image backup without any error. If not, you can move on to the next potential fix to resolve it.

Read: System Image Backup failed, Error 0x80780038.

4] Run the Chkdsk command

This error can be a result of bad sectors on your hard drive. If the scenario is applicable, you should be able to fix it up by running the Chkdsk command to scan and fix drive errors. Here are the steps to do that:

First, launch the Command Prompt as an administrator.

Now, type the below command in it:

chkdsk C: /f /r /x

In the above command, C is the drive for which we are running the command.

Next, press Enter and let it repair the bad sectors and disk errors.

When the process is completed, reboot your computer and then create the system image backup.

5] Clear the current USN Journal

Windows has a function that records the file change and maintains a particular record which is called the update sequence number (USN) to record changes to the volume. Now, it might have sized up and can cause the error in hand. In that case, you can clear the current USN Journal to resolve the issue. Here are the steps to do that:

  1. Firstly, press the Windows + X hotkey and then select the Disk Management tool from the pop-up menu.
  2. Next, in the Disk Management app, right-click on the “System Reserved” volume and press the “Change Drive Letter and Paths…“ option.
  3. Now, click on the Change button and then select the “Assign the following drive letter:” option.
  4. After that, from the drop-down list, select a new drive letter (say F) for the reserved partition, press OK, and close the Disk Management window.
  5. Then, you have to launch the Command Prompt with administrative rights.
  6. Now, type the below command and then press Enter:
    fsutil usn queryjournal F:
    fsutil usn deletejournal /N /D F:

    In the above command, F is the drive letter you selected in step (4). You can change it as applicable.

  7. Finally, restart your computer and then check whether the error is now fixed.

See: Backup Error 0x8078012D, The request could not be performed because of an I/O device error.

6] Ensure that System Protection is enabled

Some users reportedly fixed the error by enabling System Protection. You can also try doing the same and then check if the problem is fixed. To enable System Protection, here are the steps to use:

  1. Firstly press Win+R to evoke Run dialog and then enter sysdm.cpl in it to open up the System Properties window.
  2. Now, go to the “System Protection” tab, select the C drive from the list, and tap on the Configure button.
  3. Next, enable the Turn on system protection option. You can also adjust the Max Usage slider as per your requirement.
  4. After that, press the OK button to save changes.
  5. Try creating the system image backup and then see if the error is fixed.

7] Update Disk Drivers

This error can also be a result of issues with disk drivers. So, try updating disk drivers and then see if the error is resolved. You can either update disk drivers manually using Device Manager using the below steps:

  1. Firstly, press Windows + X and select Device Manager from the shortcut menu.
  2. Now, locate the Disk drives option and right-click on your hard disk.
  3. From the right-click context menu, select the Update driver option.
  4. Next, select the Search automatically for drivers option from the prompt and Windows will start the process of updating your disk drivers.

Alternately, you can also get the latest disk driver updates via Optional Updates that you can find under Settings > Windows Update. After updating disk drivers, reboot your PC and hopefully, the error will be resolved now.

See: Windows Backup or System Restore failed, Errors 0x80070001, 0x81000037, 0x80070003.

How do I fix the Volume Shadow Copy Service error?

The Volume Shadow Copy Service errors can be fixed by restarting the related services. If that doesn’t work, you can try to run System File Checker and DISM scans, perform Chkdsk and remove any tune-up utilities. In case you are facing a particular Volume Shadow Copy Service error, here are some guides that you may find useful:

How do I set maximum shadow copy storage space?

To set maximum shadow copy storage space, here are the steps you can follow:

  1. First, open the File Explorer using Windows + E hotkey and navigate to the section of the hard drive.
  2. Now, right-click on a hard drive and then select the Configure Shadow Copies option from the right-click menu.
  3. Next, in the Shadow Copies window, select the volume for which you want to allocate shadow copy storage and press the Settings button.
  4. In the Settings window, select the volume and storage area to allocate maximum size.
  5. After that, set the maximum size to “No limit” and press the OK button. If you want to set a particular size limit, click on the Use limit option and enter the size.

That’s it!

Now read:

Error 0x80780113, Not enough space to create the volume shadow copy



Original Source link

Leave a Reply

Your email address will not be published.

two + four =